+- Maniaradio Forums (https://www.maniaradio.it/forum)
+-- Forum: CatBkt Cat Control using HamLib (https://www.maniaradio.it/forum/forumdisplay.php?fid=6)
+--- Forum: Yaesu (https://www.maniaradio.it/forum/forumdisplay.php?fid=13)
+--- Thread: CATBKT puts the radio in direct transmission (/showthread.php?tid=29)
CATBKT puts the radio in direct transmission - py4xx - 03-04-2011
CATBKT installed, but the settings do not match to my FT-897D ... When setting up and open the program, the radio is in direct transmission.
No more setting that I have not tried ...
Any tips please??
RIG: FT-897D
CAT: Made in House
S.O.: Win 7 Ultimate
USB to Serial Adapter: COM4
For use with the BBLOGGER.
Thanks.
Re: CATBKT puts the radio in direct transmission - iz2bkt - 03-04-2011
Hi,
Try this: go in COM configuration and put off RTS and DTR
Re: CATBKT puts the radio in direct transmission - py4xx - 03-04-2011
I've tried all possible ways to configure the COM, and none of them decided ...
Re: CATBKT puts the radio in direct transmission - iz2bkt - 03-04-2011
Uses catbkt version Alpha 22 and try to disable the smeter (click the SMeter button)
Re: CATBKT puts the radio in direct transmission - py4xx - 03-06-2011
I'm using version ALPHA 22, and even disabling S METER, it is in direct transmission ... Does not work ...
Re: CATBKT puts the radio in direct transmission - iz2bkt - 03-07-2011
You tested your interface with other cat programmes?
I have other users who use catbkt with the Yaesu ft897 without problems.
Re: CATBKT puts the radio in direct transmission - py4xx - 03-08-2011
Hi...
The interface is work very well with N1MM, HRD, WINTEST, and others soft with CAT...
Only in BBLOGGER with CATBKT it not work...
Tahnks...
Carlos Alberto
PY4XX
Re: CATBKT puts the radio in direct transmission - iz2bkt - 03-08-2011
I am sorry for the problem,
if possible, try another interface.